Products

Die-Sep Product Lineup.

Die-Sep

Stop using pry bars, hammers, cranes and your technician’s energy and time simply to open, tip and close molds. Their energy and time is better spent performing actual cleaning, repairs and maintenance. Protect your guys and keep them fresh throughout the day! 

The various Die-Sep Standard Models will open and close molds weighing from 1,000 – 70,000 pounds. The Mini Die-Sep handles smaller molds. When equipped with one of our three Split-N-Tip models, the Die-Sep tipper, it can tip molds or mold halves weighing up to 50,000 pounds.

One of the largest Die-Sep machines in operation today opens a 68,000 pound mold with 22 inch leader pins in less than 30 seconds once it is lowered vertically into the Die-Sep.

Fourteen Standard Models of the Die-Sep can be delivered in 8 weeks and custom built machines are delivered in 12 weeks.

Tool rooms opening 3 molds per day will usually see a 15 Month ROI and shorter when opening more.

Portable Mold Water Leak Tester

Our portable Mold Water Leak Tester will let your technicians test an entire mold halve or up to 12 individual circuits for leaks in the tool room, on the production floor, or elsewhere. Some of its specifications are:

  • 12 Circuits
  • 25 gallon reservoir
  • Swivel casters
  • Fork truck pocket
  • Hose storage area
  • 3 gallons per minute
  • 45 psi water pump
  • Up to 125 psi with shop air
  • Digital flow meter
  • Pressure gauge
  • Optional Reynolds Number thermometer unit.

Model MWLT 212 – $6,499 

Split-N-Tip, the Die-Sep tipper

Three different models of tippers are usually added to the Die-Sep machine. With capacities of 8,000, 25,000 and 50,000 pounds, these tippers will tip their load up or down in 30 – 60 seconds. While the largest Die-Sep tipper in use today will tip molds weighing 50,000 pounds, it’s scale-able to 100,000 pounds.

Full

Tilt 30%

Tilt 60%

100% Tilt

Our core pull accessory is usually added to the housing of the tipper and this, of course, allows technicians to hydraulically work cores while the mold half is still in the Die-Sep, further saving time and energy from not having to move the mold for testing.

Less time moving it equals more time your guys are using their skills!

 

Die-Sep Mini

The Die Sep Mini was introduced at NPE2015 and will open, tip and close molds as small as 6 inches in size and weighing up to 3,000 pounds. It is designed and manufactured with two basic configurations, two movable and tipping platens or one moving and tipping and one adjustable and non-tipping platen.

The Mini can also include a core pull accessory for hydraulically working cores while your mold is still in the bay of the Mini.

Translate »